PCB FORGE v107 SVG → 3D-Printable STL Upload an SVG to begin
Source File
Piece Mode
Parameters
Base Thickness 1.6 mm
Trace Height 0.4 mm
Hole Diameter 1.2 mm
Scale (pts→mm) 0.3528
Board width
Ridge Height (0.4mm wide) 0.40 mm
⟐ Companion Settings
Channels are expanded by clearance so the base traces + copper tape fit inside.
Channel Clearance
mm
Press Offset 0.20 mm
Spike Height 0.5 mm
Companion Thickness 3.0 mm
No SVG loaded
Illustrator default: 1pt = 0.3528mm
Drag to orbit · Right/middle-drag to pan · Scroll to zoom
⬡
PCB FORGE v107
Base: raised traces + holes.
Companion: channeled slab with registration rim — a proper 2-part mold for copper tape.