OFFLINE
Relay Status
○STOPPED
Local IP
—
UDP Port
28340
Peers Connected
0
Packets Relayed
0
Quest Connection Target
Set this as ProxyAddress in LabFusion's MelonLoader preferences on your Quest.
Start relay to get address
Connected Peers
IDAddressSteamIDSincePackets
No peers connected
Setup Guide
1
Steam must be running
Fusion Helper requires an active Steam session. Make sure Steam is open and you're logged in before starting the relay.
2
Same Wi-Fi network
Your Quest and this device must be on the same Wi-Fi network, OR connect the Quest directly to this device's hotspot.
3
Start the relay above
Press Start Relay. The IP address will appear in the box above. Note it down.
4
Configure Quest MelonLoader preferences
In UserData/MelonPreferences.cfg on the Quest, under [LabFusion.Proxy]:
ProxyAddress = <IP shown above>
ProxyPort = 28340
5
Launch Bonelab on your Quest
Open Bonelab. LabFusion will connect through this relay automatically. The peer count above will increment when connected.
Console Log
Steam Web API: key not set — add key in Settings to enable lobby browsing
SHOW PRIVATE
SHOW FULL
SHOW PASSWORD
MATCH VERSION
Direct Join — SteamID64 (v1.2.0 validation)
✓
0 lobbies
📡

No Lobbies Loaded

Add your Steam Web API key in Settings, then press Fetch.
App ID: 2448170 (BONELAB)

◈ Account & Auth
Find at steamid.io
✓Verified
For Fusion Content / Fusion Cosmetics validation. Token at mod.io/me/access
Fusion mod.io game ID: 3809
◉ Network
Must match ProxyPort in Quest's MelonPreferences.cfg. Default: 28340
Leave blank to auto-detect local LAN IP
Auto-start on open
Start relay automatically when this page loads
◎ Steam Web API
Free key at steamcommunity.com/dev/apikey
Used to call ISteamMatchmaking/GetLobbyList with appid 2448170
When version chip is ON, only lobbies matching this FusionVersion will show.